Mackie Big Knob Studio Command System
Item Location
This item is available for Collection or Delivery from:
Cash Generator Northwich, 7 Witton Street, Northwich, CW9 5DE
Email: [email protected]
Telephone: 01606359719
Item Condition
Condition: Pre-Owned: Grade B
item is used but in good working order has been tested and checked over has signs of use and small wear but does not affect use
Item Description
Designed for desktop use and powered from the mains rather than from a power adaptor, the Big Knob can select between four stereo input sources, one of which is the stereo monitor mix from your DAW's soundcard or audio interface. These can be routed to any one of three sets of monitors plus four sets of stereo outputs, and there's also a built-in headphone amp with two headphone outputs for headphone monitoring in the control room, as well as a separate stereo studio output that can be sourced from the selected input source or from an external stereo source such as a DAW's aux send. Most of the inputs are switchable from +4dBu to -10dBV, or have gain trims, and all the signal connections other than the Phono inputs are on balanced jacks. The Phono inputs are designed to be used with a record deck fitted with a magnetic cartridge and have the necessary RIAA equalisation. Selected sources are routed to the control-room buss, which in turn also feeds the DAW output and two two-track outputs on balanced jacks, allowing the output from a record deck to be recorded back to the DAW or to a two-track recorder. All four sources and all three monitors have rear-panel gain-trim pots, and all the outputs (2-track A, 2-track B, DAW Output, and Phones Amp) are switchable from +4dBu to -10dBV.
- Audio Bit Depth: 24-bit
- Max Sampling Rate: 192 kHz
- Instrument Inputs: 0
- Line Inputs: Balanced/unbalanced audio input - phone stereo 6.3 mm x 2 (1), Audio line-in - mini-phone stereo 3.5 mm (1)
- Monitor Outputs: 2 monitor pairs
- Simultaneous Inputs: 2
- Simultaneous Outputs: 2
- Computer Interface: USB
- Analog Inputs: 1/8" input (for smartphone)
- Analog Outputs: Two balanced outputs (for monitors or monitor amps), 2-Track output (for a recorder)
- Headphone Outputs: 2
- Digital I
/ O: 0 (S/PDIF Connectors) - Additional Ports: Built-in inputs for talkback mic and footswitch control
- Wireless Connectivity: No
- Power Source: DC 18 V supply, AC 100-240 V, AC 120/230 V
- Phantom Power: Yes (for condenser microphones)
- Direct Monitoring: Yes (Cue mix allows controlled blending of direct inputs with other signals for zero-latency recording)
- Latency: Zero-latency recording
- Dynamic Range: Ultra-wide 60 dB of gain range (Onyx preamps)
- Frequency Response: 0.5 dB, 20 Hz - 20 kHz (unity gain, +4 dbu all outputs)
- Form Factor: Desktop
- Dimensions: 9.9 in (Width)
- Weight: 3.53 lbs
- Material: Steel housing
- Preamps: Dual Mackie Onyx preamps, Award-winning Onyx mic preamps
- Controls: Mute function, Built-in talkback mic, Classic Big Knob volume control, Dim functions, Mono function
- Included Software: Waveform OEM recording software
- Included Accessories: 18V DC power supply
- Indicators: 16-segment high-resolution input source metering
- Top Use Cases: Recording, Podcasting
- Typical Users: Studios of any size
- Skill Level: Intermediate
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Mackie Big Knob Studio Command System
Mackie Big Knob Studio Command System
Item Location
This item is available for Collection or Delivery from:
Cash Generator Northwich, 7 Witton Street, Northwich, CW9 5DE
Email: [email protected]
Telephone: 01606359719
Item Condition
Condition: Pre-Owned: Grade B
item is used but in good working order has been tested and checked over has signs of use and small wear but does not affect use
Item Description
Designed for desktop use and powered from the mains rather than from a power adaptor, the Big Knob can select between four stereo input sources, one of which is the stereo monitor mix from your DAW's soundcard or audio interface. These can be routed to any one of three sets of monitors plus four sets of stereo outputs, and there's also a built-in headphone amp with two headphone outputs for headphone monitoring in the control room, as well as a separate stereo studio output that can be sourced from the selected input source or from an external stereo source such as a DAW's aux send. Most of the inputs are switchable from +4dBu to -10dBV, or have gain trims, and all the signal connections other than the Phono inputs are on balanced jacks. The Phono inputs are designed to be used with a record deck fitted with a magnetic cartridge and have the necessary RIAA equalisation. Selected sources are routed to the control-room buss, which in turn also feeds the DAW output and two two-track outputs on balanced jacks, allowing the output from a record deck to be recorded back to the DAW or to a two-track recorder. All four sources and all three monitors have rear-panel gain-trim pots, and all the outputs (2-track A, 2-track B, DAW Output, and Phones Amp) are switchable from +4dBu to -10dBV.
- Audio Bit Depth: 24-bit
- Max Sampling Rate: 192 kHz
- Instrument Inputs: 0
- Line Inputs: Balanced/unbalanced audio input - phone stereo 6.3 mm x 2 (1), Audio line-in - mini-phone stereo 3.5 mm (1)
- Monitor Outputs: 2 monitor pairs
- Simultaneous Inputs: 2
- Simultaneous Outputs: 2
- Computer Interface: USB
- Analog Inputs: 1/8" input (for smartphone)
- Analog Outputs: Two balanced outputs (for monitors or monitor amps), 2-Track output (for a recorder)
- Headphone Outputs: 2
- Digital I
/ O: 0 (S/PDIF Connectors) - Additional Ports: Built-in inputs for talkback mic and footswitch control
- Wireless Connectivity: No
- Power Source: DC 18 V supply, AC 100-240 V, AC 120/230 V
- Phantom Power: Yes (for condenser microphones)
- Direct Monitoring: Yes (Cue mix allows controlled blending of direct inputs with other signals for zero-latency recording)
- Latency: Zero-latency recording
- Dynamic Range: Ultra-wide 60 dB of gain range (Onyx preamps)
- Frequency Response: 0.5 dB, 20 Hz - 20 kHz (unity gain, +4 dbu all outputs)
- Form Factor: Desktop
- Dimensions: 9.9 in (Width)
- Weight: 3.53 lbs
- Material: Steel housing
- Preamps: Dual Mackie Onyx preamps, Award-winning Onyx mic preamps
- Controls: Mute function, Built-in talkback mic, Classic Big Knob volume control, Dim functions, Mono function
- Included Software: Waveform OEM recording software
- Included Accessories: 18V DC power supply
- Indicators: 16-segment high-resolution input source metering
- Top Use Cases: Recording, Podcasting
- Typical Users: Studios of any size
- Skill Level: Intermediate
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Item Location
This item is available for Collection or Delivery from:
Cash Generator Northwich, 7 Witton Street, Northwich, CW9 5DE
Email: [email protected]
Telephone: 01606359719
Item Condition
Condition: Pre-Owned: Grade B
item is used but in good working order has been tested and checked over has signs of use and small wear but does not affect use
Item Description
Designed for desktop use and powered from the mains rather than from a power adaptor, the Big Knob can select between four stereo input sources, one of which is the stereo monitor mix from your DAW's soundcard or audio interface. These can be routed to any one of three sets of monitors plus four sets of stereo outputs, and there's also a built-in headphone amp with two headphone outputs for headphone monitoring in the control room, as well as a separate stereo studio output that can be sourced from the selected input source or from an external stereo source such as a DAW's aux send. Most of the inputs are switchable from +4dBu to -10dBV, or have gain trims, and all the signal connections other than the Phono inputs are on balanced jacks. The Phono inputs are designed to be used with a record deck fitted with a magnetic cartridge and have the necessary RIAA equalisation. Selected sources are routed to the control-room buss, which in turn also feeds the DAW output and two two-track outputs on balanced jacks, allowing the output from a record deck to be recorded back to the DAW or to a two-track recorder. All four sources and all three monitors have rear-panel gain-trim pots, and all the outputs (2-track A, 2-track B, DAW Output, and Phones Amp) are switchable from +4dBu to -10dBV.
- Audio Bit Depth: 24-bit
- Max Sampling Rate: 192 kHz
- Instrument Inputs: 0
- Line Inputs: Balanced/unbalanced audio input - phone stereo 6.3 mm x 2 (1), Audio line-in - mini-phone stereo 3.5 mm (1)
- Monitor Outputs: 2 monitor pairs
- Simultaneous Inputs: 2
- Simultaneous Outputs: 2
- Computer Interface: USB
- Analog Inputs: 1/8" input (for smartphone)
- Analog Outputs: Two balanced outputs (for monitors or monitor amps), 2-Track output (for a recorder)
- Headphone Outputs: 2
- Digital I
/ O: 0 (S/PDIF Connectors) - Additional Ports: Built-in inputs for talkback mic and footswitch control
- Wireless Connectivity: No
- Power Source: DC 18 V supply, AC 100-240 V, AC 120/230 V
- Phantom Power: Yes (for condenser microphones)
- Direct Monitoring: Yes (Cue mix allows controlled blending of direct inputs with other signals for zero-latency recording)
- Latency: Zero-latency recording
- Dynamic Range: Ultra-wide 60 dB of gain range (Onyx preamps)
- Frequency Response: 0.5 dB, 20 Hz - 20 kHz (unity gain, +4 dbu all outputs)
- Form Factor: Desktop
- Dimensions: 9.9 in (Width)
- Weight: 3.53 lbs
- Material: Steel housing
- Preamps: Dual Mackie Onyx preamps, Award-winning Onyx mic preamps
- Controls: Mute function, Built-in talkback mic, Classic Big Knob volume control, Dim functions, Mono function
- Included Software: Waveform OEM recording software
- Included Accessories: 18V DC power supply
- Indicators: 16-segment high-resolution input source metering
- Top Use Cases: Recording, Podcasting
- Typical Users: Studios of any size
- Skill Level: Intermediate
